 |
|
|
|
|
|
|
B-1017-B
|
|
|
COLLAPSIBLE HOT STICKS
 |
Ross Engineering Corporation’s collapsible Hot
Sticks are designed to maintain proper safety clearances from
hazardous high voltage while hand holding a test instrument. The 15.5
inch, 1.25 or 1.5 inch
diameter sections of the Hot Stick form a rigid handle from 1.5 to 12 feet in length depending on your specific needs. Please see the OSHA clearance table to determine what clearance is appropriate for your applications. Each section is
constructed using high strength insulating tubing. Hot Sticks are sealed and filled with lightweight plastic foam to form a rigid insulating support. These
15.5 inch sections can be joined easily to create the desired length of
Hot Stick. Disassembled, Hot Sticks store easily in a
carrying case. The collapsible Hot Sticks’ size and weight make them ideal for use in portable test sets. A 5/8 - 11 tapped end is standard and fits most standard equipment. |
|
6 foot model VMHSC-6-B/C 1.25” Diameter
9 foot model VMHSC-9-C/C 1.5” Diameter |
|
|



 |
|
|
 |
|